top of page
  • NetCorp

Floor waxing | Office renovation

To prepare the floor before installing new vinyl tiles, you can follow these steps:

Stripping the Floor:

  • Start by cleaning the existing floor to remove any dirt, dust, or residue from previous cleaning products.

  • Use a stripper to remove any existing wax or varnish on the floor. Be sure to carefully follow the manufacturer's instructions for applying the stripper.

  • Use a scraper or putty knife to gently scrape away softened layers of wax or varnish.

  • After applying the stripper, rinse the floor thoroughly with clean water to remove any chemical residue.

Floor Preparation:

  • Allow the floor to dry completely after stripping.

  • Check the condition of the floor to ensure it is smooth and free of major cracks or bumps. If necessary, make any needed repairs.

  • Ensure the floor is properly leveled. If there are imperfections, use a filler to patch them and a level to check for uniformity.

Waxing the Floor:

  • Once the floor is completely dry and prepared, you may consider applying a new wax or sealer. Make sure to choose a product compatible with vinyl tiles.

  • Follow the manufacturer's instructions for applying the wax or sealer. Use a wax applicator or paint roller for even application.

  • Allow the wax or sealer to dry completely before starting the vinyl tile installation.

Cirage de plancher - Bureaux - plancher brillant
Cirage de plancher - Bureaux

By following these steps carefully, you should be able to properly prepare your floor for successful vinyl tile installation. Be sure to choose stripping, waxing, and installation products that suit your specific needs and follow instructions closely for optimal results. Contact us for floor care services including stripping and waxing on VCT, we cover the Montreal, Laval, Longueuil and other cities in Québec Canada.

Tél: 1-855-695-7474


bottom of page